2 POST RACKS
Features
- Available in 19″ and 23″ rack configurations
- EIA or WECO hole spacing, pre-tapped holes
- All hardware provided for assembly
- Holes on sides of uprights are provided for joining adjacent racks
- As option, blank panels used in open areas will provide additional lateral stiffness.
- Anchor kits are sold separately
- Standard Accessories are available
Standard Specifications:
MOUNTING HOLES: 12-24 tapped
FINISH: Telco gray powder coat
HOLE SPACING: EIA standard (WECO optional)
ASSEMBLY: Bolted
MATERIAL: Heavy Gauge Steel
Downloads
You May Also Be Interested In These:
Features
- Available in 19″ and 23″ rack configurations
- EIA or WECO hole spacing, pre-tapped holes
- Welded construction provides extra strength
- Holes on sides of uprights are provided for joining adjacent racks
- As option, blank panels used in open areas will provide additional lateral stiffness.
- Anchor Kits are sold separately
- Standard Accessories are available
Standard Specifications:
MOUNTING HOLES: 12-24 tapped
FINISH: Telco gray powder coat
HOLE SPACING: EIA standard (WECO optional)
ASSEMBLY: Welded
MATERIAL: Heavy Gauge Steel
Downloads
Cut Sheets
Spec Sheets
You May Also Be Interested In These:
Features
- Available in 19″ and 23″ rack configurations
- Static Rating: Up to 800 lbs.
- EIA or WECO hole spacing, pre-tapped holes
- Large side base gussets and welded construction offer greater stability for equipment
- Holes on sides of uprights are provided for joining adjacent racks
- Masked grounding provisions provided on top of rack, in front and rear
- As option, blank panels used in open areas will provide additional lateral stiffness.
- Anchor Kits are sold Separately
- Standard Accessories are available
Standard Specifications:
MOUNTING HOLES: 12-24 tapped
FINISH: Telco gray powder coat
HOLE SPACING: EIA standard (WECO optional)
ASSEMBLY: Welded
MATERIAL: Heavy Gauge Steel
Downloads
You May Also Be Interested In These:
Features
- Available in 19″ and 23″ rack configurations
- Static Rating: Up to 800 lbs.
- EIA or WECO hole spacing, pre-tapped holes
- Large base gussets and wide upright channels offer best stability for non-seismic applications.
- All welded construction
- Holes on sides of uprights are provided for joining adjacent racks
- Masked grounding provisions provided on top of rack, in front and rear
- As option, blank panels used in open areas will provide additional lateral stiffness.
- Anchor Kits are sold Separately
- Standard Accessories are available
Standard Specifications:
MOUNTING HOLES: 12-24 tapped
FINISH: Telco gray powder coat
HOLE SPACING: EIA standard (WECO optional)
ASSEMBLY: Welded
MATERIAL: Heavy Gauge Steel
Downloads
You May Also Be Interested In These:
Features
- Tested per Telcordia GR-63-Core seismic criteria and certified to support up to 525 lbs. in Zone 4 seismic areas
- Static Rating: Up to 1250 lbs. without additional bracing
- As option, blank panels used in open areas will provide additional lateral stiffness.
- Closed Duct, Closed Duct with Top Angle, Open Duct and Open Duct with Top Angle configurations are available in both 19″ and 23″ width.
- EIA or WECO hole spacing patterns
- Front and rear flanges have pre-tapped holes.
- Masked grounding provisions provided in front and rear of rack
- Anchor Kits are sold Separately
Standard Specifications:
MOUNTING HOLES: 12-24 tapped
FINISH: Telco gray powder coat
HOLE SPACING: EIA standard (WECO optional)
ASSEMBLY: Welded
MATERIAL: Heavy Gauge Steel
STANDARD HEIGHT: 84″
Certifications
You May Also Be Interested In These:
Features
- Static Rating: Up to 850 lbs.
- As option, blank panels used in open areas will provide additional lateral stiffness.
- Closed Duct, Closed Duct with Top Angle, Open Duct and Open Duct with Top Angle configurations are available in both 19″ and 23″ width.
- EIA or WECO hole spacing patterns
- Front and rear flanges have pre-tapped holes.
- Masked grounding provisions provided in front and rear of rack
- Anchor Kits are sold Separately
Standard Specifications:
MOUNTING HOLES: 12-24 tapped
FINISH: Telco gray powder coat
HOLE SPACING: EIA standard (WECO optional)
ASSEMBLY: Welded
MATERIAL: Heavy Gauge Steel
STANDARD HEIGHT: 84″
You May Also Be Interested In These:
Features
- Tested per Telcordia GR-63-Core seismic criteria and certified to support up to 525 lbs. in Zone 4 seismic areas
- Static Rating: Up to 1250 lbs. without additional bracing
- As option, blank panels used in open areas will provide additional stiffness.
- Closed Duct, Closed Duct with Top Angle, Open Duct and Open Duct with Top Angle configurations are available in both 19″ and 23″ width.
- EIA or WECO hole spacing patterns
- Front and rear flanges have pre-tapped holes.
- Low profile base design provides additional mounting space
- Guard Box cover included
- Anchor Kits are sold Separately
Standard Specifications:
MOUNTING HOLES: 12-24 tapped
FINISH: Telco gray powder coat
HOLE SPACING: EIA standard (WECO optional)
ASSEMBLY: Welded
MATERIAL: Heavy Gauge Steel
STANDARD HEIGHT: 84″
Certifications
You May Also Be Interested In These:
Features
- Static Rating: Up to 850 lbs.
- Closed Duct, Closed Duct with Top Angle, Open Duct and Open Duct with Top Angle configurations are available in both 19″ and 23″ width.
- EIA or WECO hole spacing patterns
- Front and rear flanges have pre-tapped holes.
- Masked grounding provisions provided in front and rear of rack
- As option, blank panels used in open areas will provide additional lateral stiffness.
- Guard box cover included.
- Anchor Kits are sold Separately
Standard Specifications:
MOUNTING HOLES: 12-24 tapped
FINISH: Telco gray powder coat
HOLE SPACING: EIA standard (WECO optional)
ASSEMBLY: Welded
MATERIAL: Heavy Gauge Steel
STANDARD HEIGHT: 84″
Downloads
You May Also Be Interested In These:
Features
- Tested per Telcordia GR-63-Core Zone 4 criteria and certified to support up to 925 lbs.
- Static Rating: Up to 3000 lbs. without additional bracing
- As option, blank panels used in open areas will provide additional stiffness.
- Available in 19″, 23″ and ETSI panel mounting configurations
- EIA or Metric mounting hole spacing
- Uprights are designed for fast and easy cable management
- Base design allows easy installation and adjustment after equipment is installed
- Anchor kits are sold separately
Standard Specifications:
MOUNTING HOLES: 12-24 tapped
FINISH: Telco gray powder coat
HOLE SPACING: EIA standard (WECO optional)
ASSEMBLY: Welded
MATERIAL: Heavy Gauge Steel
STANDARD HEIGHT: 84″
Certifications
You May Also Be Interested In These:
